|
Two
powerful, cost effective, shears which have the ability to
accurately cut PCB laminates, plastics, polymer plates up to
2.00mm thick and aluminium up to 1.5mm.
8" and 12"
Cutters
An important feature of these shears is safety. Free access
to the cutting area is prevented by heavy Perspex shielding
extending along both sides of the blade. A safety latch is
fitted to the pivot to prevent operation without it first
being released. For positional accuracy the cutting bed is
fitted with a rule which is recessed to assist in securing
the PCB or sheeting whilst cutting is in progress.
The 8" Cutter is extremely compact with an overall height of
only 575mm and a footprint of 335 X 140mm. It has a cutting
bed of 110mm wide from the blade although wider material can
be cut.
The larger 12" Cutter will cut materials up to has a height
of 670mm and a footprint of 440 x 245mm. It has a larger
cutting bed 225mm wide from the blade although once again
wider material can be cut.
The 8"
Cutter costs £165.00+VAT
The 12" Cutter costs £215.00+VAT
Postage and Packing extra.
18"
and 25" Shears
Two bench top shears suitable for cutting printed circuit
board laminates, thin metal sheet and aluminium (1.5/2.0mm)
or plastic labels / front panel materials. On lowering the
operating handle, a spring loaded clamp is activated which
holds the material securely during cutting, thus enabling
cuts to be made with a minimum of effort.
18"
Cutter costs £410.00+VAT
25" Cutter costs £795.00+VAT
Postage and Packing is extra
18" Shears
25" Shears
These shears are composed of an epoxy powder coated cast
aluminium frame fitted with hardened and ground steel blades.
The 18" Model has a clear acrylic front safety guard to
protect the operator, whilst at the same time making it
possible to see the blades so that the material to be cut can
be aligned accurately.
Both , the 18" Cutter and the 25" Cutter have imperial and
metric edge scales and fully adjustable front and back stops
for batch work.
Corner Rounder
An inexpensive invaluable tool to meet the demand for a quick
corner rounding facility for plastic/metal labels and front
panels.
The table is effectively split into two halves, each
containing 90 degree stops, in the angle of each is a
hardened radius of either 6mm or 4mm. The punch has been
ground to simultaneously marry both of these rounds when
driven down by the cam actioned handle.
The material to be rounded is slid from the left or right
hand side positively into the stops, to leave an overhang
which is sheared through by the punch to leave a clean
corner of
either
6mm
or 4mm radius.
It should be noted that material originally cut out of
square will result in an unbalanced round being removed. The
table support column is mounted on a 5" X 5" steel plate with
screw holes for bench fixing, although this will probably be
unnecessary for most users. Overall height with handle
upright 8" (205mm) and weight 1.2Kg.
Round
Corner £140.00+VAT
Postage & Packing is extra. |
